Residential
Dining rooms, living rooms, bedrooms, kitchens, stairwells, foyers and private villas.
Description
xThe VP1 Double Dome Pendant Lamp combines two precisely balanced metal domes in a compact sculptural silhouette inspired by mid-century Scandinavian lighting. Its layered metal form directs light downward while reducing direct glare, making it especially suitable above dining tables, kitchen islands, desks and bedside surfaces. A wide selection of neutral, vivid and metallic finishes allows the pendant to work as either a subtle architectural accent or a stronger color statement. Available in two sizes with an adjustable suspension cable, the VP1 Double Dome Pendant Lamp works naturally in mid-century, Scandinavian, contemporary and colorful modern interiors.
Product Size
Small: Dia 9.1″ × H 6.3″ / Dia 23 × H 16 cm Large: Dia 14.9″ × H 10.2″ / Dia 38 × H 26 cm Suspension Cable: 59″ / 150 cm
Details
- Material: Aluminum, metal and iron.
- Finish / Color: Available in multiple neutral, colorful and metallic finishes.
- Light Source: 1 × E26 or E27 replaceable bulb.
- Bulb Included: Varies by selected option.
- Recommended Bulb: Low-heat LED bulb.
- Recommended Color Temperature: 2700K–3000K warm white.
- Recommended LED Wattage: Approximately 5W LED.
- Small Size: Dia 23 × H 16 cm / Dia 9.1″ × H 6.3″.
- Large Size: Dia 38 × H 26 cm / Dia 14.9″ × H 10.2″.
- Voltage: AC 110–240V. Use a locally compatible bulb.
- Control: External wall switch. Switch not included.
- Dimming: Requires a compatible dimmable bulb and wall dimmer.
- Suspension: 150 cm / 59″ adjustable cable.
- Power: Hardwired ceiling connection.
- Installation: Professional installation by a qualified electrician is recommended.
- Suitable Rooms: Dining room, kitchen island, bedroom, study, reading area, restaurant and hotel.
- Suitable Styles: Mid-century modern, Scandinavian, retro, contemporary and colorful modern interiors.
- Indoor / Damp Rating: IP20; indoor dry-location use only. Not waterproof.
- Care: Turn off power before cleaning. Wipe the metal surfaces gently with a clean, soft, dry cloth. Avoid abrasive cleaners and excess moisture.
Download
Frequently Asked Questions
What sizes are available?
The VP1 Double Dome Pendant Lamp is available in two sizes: a 9.1-inch / 23 cm diameter version and a larger 14.9-inch / 38 cm diameter version. Choose the size according to the table, island or ceiling area below.
What bulb does the VP1 Double Dome Pendant Lamp use?
The fixture accepts one replaceable E26 or E27 bulb, depending on the selected regional configuration. A low-heat LED bulb is recommended, with approximately 2700K–3000K warm white for comfortable residential lighting.
Is the pendant dimmable?
Yes, when paired with a compatible dimmable E26 or E27 bulb and an appropriate wall dimmer. The dimmer is not included with the fixture.
Can the suspension cable be adjusted?
Yes. The supplied suspension cable is approximately 59 inches / 150 cm long and can be shortened during installation to suit the ceiling height and surface below.
Where does the VP1 Double Dome Pendant Lamp work best?
Its focused downward light and compact sculptural form work particularly well above dining tables, kitchen islands, desks and bedside surfaces. It also suits restaurants, cafés and other modern interior spaces.
3D Customization Service
x
Noctlight · Project & Trade Support
See the Light
Before You Commit.
Our complimentary project review and 3D lighting visualization service helps homeowners, interior designers and trade professionals evaluate scale, placement, finish and atmosphere before approving an eligible lighting order.
Complimentary ReviewNo design fee for eligible projects
Scaled VisualizationProportion and placement planning
Residential & TradeSingle rooms to commercial concepts
Remote WorldwideProject support delivered online
Designed Around Your Space
A clearer way to plan statement lighting.
Lighting can feel very different on a product page than it does beneath a real ceiling. Our project team uses your room information, reference imagery and selected Noctlight fixture to prepare a visual planning proposal for eligible projects.
The goal is practical: understand the relationship between fixture, furniture and architecture before the order moves forward.
Visualize the scale
Review diameter, drop, spacing and overall presence within the room.
Compare placement
Evaluate centering, grouping and alignment above key furniture.
Refine the finish
Consider available metal, glass, stone, wood or textile options.
Reduce avoidable errors
Identify obvious proportion or clearance concerns during planning.
Project Scope
From one room to a coordinated lighting concept.
We review residential and commercial enquiries individually. Service scope and deliverables depend on the fixture, information supplied and project complexity.
Hospitality
Restaurants, boutique hotels, cafés, bars, reception areas and guest suites.
Commercial
Retail spaces, showrooms, galleries, offices, studios and client-facing environments.
Custom Scale
Selected dimensions, suspension drops, canopy configurations and coordinated fixture groupings.
What Can Be Explored
Shape, finish and placement in context.
Depending on feasibility and the selected product, a proposal may explore:
- Overall fixture diameter, height, drop and arm proportions
- Suspension length, cable color and canopy arrangement
- Available metal, glass, stone, wood or fabric finishes
- Single-fixture and multi-fixture layouts
- Placement above tables, islands, staircases or lobby areas
- Available voltage, socket and light-source configurations
- Commercial quantities and coordinated finish schedules
The Process
Five steps from brief to approval.
Every project begins with information, not assumptions. You remain involved at each decision point, and production begins only after the final written specification and payment terms are approved.
Share your brief
Send dimensions, photos, drawings, destination country, selected fixtures, finish direction and quantity.
Feasibility review
We assess the available information, product suitability, customization options and service scope.
Visual proposal
For eligible projects, we prepare a scaled drawing, finish reference or 3D visualization.
Review & refine
You provide consolidated feedback. Reasonable revisions within the agreed scope may be incorporated.
Approve & produce
After written approval, final quotation and required payment, the order can move into production.
Prepare Your Enquiry
What to send for a useful review.
The more complete your brief, the more accurately we can evaluate scale, placement and available product options.
Room dimensionsLength, width and finished ceiling height.
Installation pointJunction-box location, ceiling type and known structural constraints.
Reference materialRoom photos, floor plans, elevations, sketches or inspiration images.
Product directionNoctlight product links, desired finish, dimensions and quantity.
Project locationDestination country and intended residential or commercial use.
Target timingDesired delivery date and any construction milestones.
Begin Your Project
Tell us about your space.
Send the essential details below. We will review your enquiry and reply with the available next step, requested information and expected service scope.
- Email: info@noctlight.com
- Service: Remote project support worldwide
- Files: After submitting, drawings and larger files may be sent by email
Lighting Size Guide
xNoctlight Planning Guide
Lighting Size &
Placement Guide
Choose lighting with confidence using practical sizing formulas, room-specific recommendations and both US and metric measurements.
Ask for size advice
Section 01
Three professional sizing formulas
Use these as design starting points. Always check the exact product dimensions, ceiling conditions and required clearances before ordering.
Add the room length and width in feet. Use the total in inches as an approximate chandelier or ceiling-light diameter.
12 ft + 14 ft = approximately 26 in / 66 cm diameter
A dining fixture around one-half to two-thirds of the table width usually creates balanced proportions and comfortable sightlines.
40 in table = approximately 20–27 in / 51–69 cm fixture
Multiply ceiling height in feet by 2.5–3 inches to estimate a visually balanced chandelier height in an open area.
10 ft ceiling = approximately 25–30 in / 64–76 cm fixture height
Section 02
Measuring for pendant lighting
Measure from the lowest point of the fixture to the furniture surface. For multiple pendants, measure center-to-center spacing.
Kitchen Island
Hang pendant bottoms about 30–36 in / 76–91 cm above the counter. Space centers approximately 24–30 in / 61–76 cm apart, adjusted for shade width.
Dining Room
Keep the fixture inside the table perimeter and position its lowest point approximately 30–36 in / 76–91 cm above the tabletop.
Bedroom
Above a nightstand, allow around 12–20 in / 30–51 cm between the shade bottom and the surface, then adjust for seated eye level and reach.
Section 03
Quick fixture size chart
This chart gives a practical first estimate for a single central decorative fixture. Open-plan rooms and unusually tall ceilings may require a larger fixture or a multi-light composition.
| Room area | Suggested diameter | Common applications | Metric reference |
|---|---|---|---|
| Under 80 sq ft | 12–18 in | Small bathroom, closet, compact hallway | 30–46 cm |
| 80–150 sq ft | 18–24 in | Bedroom, breakfast area, small dining room | 46–61 cm |
| 150–250 sq ft | 24–30 in | Dining room, bedroom, medium living room | 61–76 cm |
| 250–400 sq ft | 30–40 in | Large living room, open dining space | 76–102 cm |
| 400+ sq ft | 40–54 in or cluster | Open-plan room, foyer, commercial interior | 102–137 cm or custom |
Approximate design guidance only. 1 sq ft = 0.0929 m². Use the room formula and furniture dimensions for a more tailored result.
Ceiling-height considerations
Keep it close
Choose flush or semi-flush fixtures to preserve headroom. Avoid long drops in circulation areas.
Standard proportions
Pendants and chandeliers work well. Maintain at least 7 ft / 213 cm clearance where people walk beneath.
Increase visual scale
Consider taller chandeliers, extended suspension lengths or multi-light clusters. Confirm service access and structural support.
Section 04
Room-by-room placement guide
The correct scale depends on both the room and the surface beneath the fixture. These recommendations help balance visibility, comfort and usable light.
Dining room
Make the fixture a focal point without blocking conversation or extending beyond the table.
- Fixture width: approximately ½–⅔ of table width
- Bottom height: 30–36 in / 76–91 cm above table
- Tables over 72 in / 183 cm may suit two or three pendants
Kitchen island
Prioritize even task light and clear sightlines across the kitchen.
- Bottom height: approximately 30–36 in / 76–91 cm
- Centers: commonly 24–30 in / 61–76 cm apart
- Leave roughly 6–12 in / 15–30 cm from the outer shade to each island end
Living room
Combine ambient, task and accent lighting rather than relying on one central fixture.
- Use room length + width formula for ceiling fixture diameter
- Maintain at least 7 ft / 213 cm walkway clearance
- Pair overhead light with floor lamps, table lamps or sconces
Bedroom
Use warm, layered lighting and keep bedside controls within comfortable reach.
- Bedside pendant: usually 8–14 in / 20–36 cm wide
- Shade bottom: about 12–20 in / 30–51 cm above nightstand
- Check seated eye level, head clearance and switch position
Bathroom vanity
Side sconces generally provide more even facial illumination than a single overhead light.
- Sconce center: around 60–66 in / 152–168 cm from floor
- Pair spacing: around 28–36 in / 71–91 cm apart
- Confirm damp/wet rating and local electrical requirements
Entryway & hallway
Use vertical volume in a foyer while protecting circulation and door clearances.
- Minimum open-walkway clearance: 7 ft / 213 cm
- In a two-story foyer, consider second-floor sightlines
- Check door swing, stair clearance and maintenance access
Dining table reference
| Table size | Single fixture | Multiple-fixture option | Recommended height |
|---|---|---|---|
| 36–42 in / 91–107 cm round | 16–22 in / 41–56 cm | Usually one fixture | 30–36 in / 76–91 cm above table |
| 48–60 in / 122–152 cm long | 22–30 in / 56–76 cm | Two fixtures, 10–16 in / 25–41 cm each | 30–36 in / 76–91 cm above table |
| 72–84 in / 183–213 cm long | 28–40 in / 71–102 cm or linear | Two fixtures, 16–22 in / 41–56 cm each | 30–36 in / 76–91 cm above table |
| 96 in / 244 cm or longer | Linear fixture or custom composition | Two to three evenly spaced pendants | Adjust for shade scale and sightlines |
Wall, table and floor lamps
| Fixture | Starting position | Important checks |
|---|---|---|
| General wall sconce | Center around 60–66 in / 152–168 cm above floor | Projection, glare, furniture and door clearance |
| Bedside wall light | Position for comfortable reading while seated | Reach, switch location and pillow/head clearance |
| Picture light | Width around ½–⅔ of artwork width | Beam spread, wall projection and artwork sensitivity |
| Bedside table lamp | Shade bottom close to seated eye level | Nightstand height, shade diameter and reading position |
| Floor lamp beside seating | Shade lower edge near seated eye level | Foot traffic, base stability and task direction |
Section 05
Before ordering: measurement checklist
Photograph the installation area and record the following information if you would like Noctlight to help review the scale.
Room
Length, width, ceiling height and distances to walls, doors, fans and sprinklers.
Furniture
Table, island, nightstand or artwork width, length and finished height.
Mounting
Junction-box position, canopy space, ceiling slope and structural support.
Full fixture
Width, height, minimum drop, maximum drop, canopy and wall projection.
Professional installation notice: These dimensions are widely used design starting points, not universal rules or installation instructions. A licensed electrician or qualified installer must confirm ceiling support, junction-box compatibility, electrical rating, clearances, voltage, damp/wet location suitability and compliance with local codes before installation.
Helpful answers
Frequently asked questions
Should a dining chandelier be centered over the room or the table?
Center it over the dining table. The furniture arrangement—not necessarily the room center—should determine the fixture location.
Can I use an oversized light in a small room?
Yes, when it is intentional and the clearances remain safe. Visually light materials, open frames and translucent shades can create drama without making the room feel crowded.
How do I size a fixture for a sloped ceiling?
Use the same room and furniture formulas, then verify that the canopy supports a sloped installation and that the supplied suspension length can create the required drop.
What if my ideal size falls between two product options?
Consider the room’s visual weight. Choose the larger option for tall ceilings or open-plan spaces and the smaller option for dense furniture layouts or fixtures with visually heavy materials.
Returns & Exchanges
xReturn & Refund Policy
Clear, practical return guidance for designer lighting, fragile materials, oversized fixtures, and made-to-order products.
Before returning an item: Email info@noctlight.com and wait for written return authorization, return instructions, and the correct warehouse address. Returns sent without prior authorization may not be accepted.
1. Return Window
You may request a return or exchange within 30 calendar days of the confirmed delivery date. A request is not complete until you have contacted us and received written return authorization. Requests submitted after the 30-day period may be declined unless applicable law requires otherwise.
2. Return Eligibility
To qualify for a return, the product must be:
- Unused, uninstalled, unwired, and unmodified;
- Free from scratches, damage, wear, or signs of assembly;
- Complete with all shades, canopies, hardware, accessories, manuals, and labels;
- Repacked in its original protective materials and original carton;
- Accompanied by valid proof of purchase.
Opening a carton for careful inspection does not automatically make an item ineligible, provided the product and all packaging remain complete and undamaged.
3. How to Start a Return
Contact Us
Email your order number, the item you wish to return, the reason for return, and your preferred resolution.
Provide Evidence
Include clear photos of the product, carton, internal packaging, shipping label, and any defect or damage.
Receive Authorization
Wait for written approval, return instructions, and the warehouse address assigned to your order.
Once authorized, ship the return within the period stated in our instructions using a trackable service. We strongly recommend adequate shipping insurance for fragile or high-value lighting. Keep the carrier receipt and tracking number until the return is fully resolved.
4. Return Shipping Costs
| Reason for return | Return shipping responsibility | Available resolution |
|---|---|---|
| Verified manufacturing defect or transit damage | Noctlight covers reasonable, pre-approved return costs when a return is required. | Replacement parts, replacement product, repair, or refund, as appropriate. |
| Incorrect item sent or material difference from the confirmed order | Noctlight covers reasonable, pre-approved return costs. | Correct replacement or refund after review. |
| Change of mind, size or finish preference, décor mismatch, duplicate order, or other non-defect reason | The customer arranges and pays return shipping, insurance, duties, and related carrier charges. | Eligible product-price refund after receipt and inspection. |
Important notice for oversized and fragile items: Large chandeliers, floor lamps, glass fixtures, stone lighting, and made-to-order products may require freight service, protective crating, insurance, customs processing, or special handling. International or oversized-item return shipping can be very expensive and, in some cases, may exceed the value of the product. Contact us before ordering if you need help confirming dimensions, finish, material, voltage, or installation compatibility.
5. Authorized Return Addresses
The addresses below are return-processing locations, not addresses that customers may use without approval. The correct destination depends on the original fulfillment location, product size, product type, and reason for return. Your written authorization will identify the address you must use.
Authorized Overseas Return Address — United States
True Legacy Homes
1628 Wellesley Ave
Los Angeles, CA 90025
United States
+1 310-912-9508
This overseas return facility may be assigned to certain eligible orders. Use it only when it is specifically confirmed in your written return authorization.
Authorized China Return Address
Huayi Plaza
Guzhen Town, Zhongshan, Guangdong
China
+86 181 8891 0534
This China return location may be assigned to factory-fulfilled, oversized, customized, or international orders. The exact recipient details and delivery instructions will be provided with your written return authorization.
Do not ship to either warehouse without written authorization. Returns sent to the wrong location may be refused, delayed, or incur additional forwarding costs. Those costs may be deducted from a refund where permitted by law and where they result from failure to follow the provided instructions.
6. Damaged, Defective, or Incorrect Items
Inspect your order promptly after delivery. If an item arrives damaged, defective, incomplete, or incorrect, contact us as soon as reasonably possible and preferably within seven days so that we can preserve available carrier-claim options. Include photos of the unopened carton, shipping label, internal protection, complete product, and affected area.
Do not install, repair, discard, or return the product or its packaging until we provide instructions. Depending on the circumstances, we may offer replacement parts, technical assistance, a replacement product, repair, a return, or a refund. Reporting within seven days helps us investigate a shipping claim but does not reduce any non-waivable legal rights.
7. Non-Returnable Items
The following are generally not eligible for preference-based returns:
- Custom-made, personalized, modified, or made-to-specification products after production has begun;
- Products that have been installed, hardwired, assembled, altered, damaged, or visibly used;
- Items missing original components, hardware, protective packaging, or accessories;
- Final-sale items, gift cards, and separately purchased replacement parts marked non-returnable before purchase;
- Products damaged by improper installation, misuse, incompatible voltage, unauthorized repair, or inadequate return packaging.
These exclusions do not apply where a verified defect or applicable consumer-protection law gives you a right to a remedy.
8. Exchanges
Exchange requests follow the same authorization and eligibility requirements as returns. The fastest available method may be to return the original eligible item and place a separate order for the replacement. Price differences, shipping costs, availability, and production lead times will be confirmed before an exchange is processed.
9. Optional Alternative Resolution
For certain preference-based returns, we may offer an optional partial refund if you keep the item, which can help avoid high international or oversized return-shipping costs. Any offer will be confirmed in writing and depends on the product and circumstances. You are not required to accept this option, and it does not limit rights that cannot be waived under applicable law.
10. Order Changes and Cancellations
Contact us as soon as possible if you need to change or cancel an order. Orders may be cancelled without charge before processing or production begins. Once materials have been ordered, customization or production has begun, or carrier services have been booked, documented nonrecoverable costs may apply where permitted by law and disclosed before the cancellation is completed.
After dispatch, an order normally cannot be cancelled. If you no longer want the item, accept delivery and follow the authorized return process. Refusing delivery without written approval may create carrier return, storage, customs, or handling costs. Actual nonrecoverable costs caused by an unauthorized refusal may be deducted from an otherwise eligible refund where permitted by law.
11. Refund Review and Timing
- Receipt: Tracking must show delivery to the authorized return facility.
- Inspection: We aim to inspect the product and packaging within 3–5 business days after receipt.
- Decision: We will notify you by email whether the return is approved and explain any permitted deduction.
- Refund: Approved refunds are issued to the original payment method, generally within 7–14 business days after inspection.
Your bank or payment provider may need additional processing time before funds appear. Original expedited shipping charges, customs duties, taxes remitted to authorities, and nonrecoverable carrier charges are not refundable unless required by law or the return resulted from our error.
12. Refund Deductions
Where permitted by law, a refund may be reduced for loss in value caused by handling beyond reasonable inspection, missing parts, installation, damage, inadequate packaging, or failure to follow authorized return instructions. We will explain any deduction. No arbitrary restocking fee is charged for an otherwise eligible return unless a product-specific term was clearly disclosed before purchase.
13. Product Characteristics and Reasonable Variations
- Screen and finish variation: Colors and finishes may appear different because of display settings, photography, lighting conditions, and production batches.
- Measurement tolerance: Hand-measured dimensions may vary slightly. Minor differences that do not affect safe use are not necessarily defects.
- Natural materials: Alabaster, marble, travertine, wood, rattan, leather, and other natural materials have unique veining, grain, texture, and tone. These inherent variations are part of the material.
- Handcrafted products: Small variations associated with hand-finishing may occur and do not automatically indicate a manufacturing defect.
Nothing in this section excludes a remedy where a product is materially different from its description or otherwise fails to meet rights provided by applicable law.
14. Regional Consumer Rights
Nothing in this policy limits statutory rights that cannot legally be excluded. Where the consumer law of your country or state provides greater protection, that law applies.
- European Union: Eligible consumers generally have a statutory withdrawal right for many distance purchases, subject to legal exceptions such as genuinely personalized goods.
- United Kingdom: Eligible consumers generally have cancellation rights for many distance contracts, subject to applicable exceptions.
- United States, Canada, Australia, and other regions: Mandatory rights concerning defective, misdescribed, or unsafe goods remain unaffected.
15. Business and Contact Information
Business Address
430 S 7th Street
Montrose, CO 81401
United States
+1 442-990-0161
info@noctlight.com
This business address is not a return address. Please contact us before returning any item.
Compare color
Shop With Confidence
Clear Product Information
Certification and compatibility details vary by product and are available on the product page or upon request.
30-Day Returns
Eligible items may be returned within 30 days in accordance with our Return & Refund Policy.
Shipping Protection
Eligible orders may qualify for a replacement or refund if a package is lost or arrives damaged.
Energy-Efficient Lighting
Many of our designs feature efficient LED technology for beautiful, dependable everyday illumination.
- Choosing a selection results in a full page refresh.
